How do you clean bag box lines?
Disconnect syrup line from Bag-in-Box . Clean all exterior surfaces of the dispenser, including levers with a clean cloth towel and Kay-5® or chlorine-based sanitizer solution. Clean in Kay-5® or chlorine-based sanitizer solution with a dedicated nozzle brush and place in sanitizer solution for at least 3 minutes.
What do you soak soda nozzles in?
When cleaning your fountain machine nozzles , make sure no chemicals are used. To maintain a tidy soda fountain machine, these should also be cleaned daily. Remove and dismantle the nozzles and soak them in hot water.
How do you clean a post mix gun?
Post mix gun cleaning is quick and easy. Clean the diffuser on the gun with a small brush and rinse it with warm water (NOT boiling). Clean the inside and the outside of the nozzle with a small brush and rinse with warm water. Give the top plate and buttons a clean with a small brush to remove any built up residue.
How do you use a soda gun?
How does the product work mechanically? – The user selects the desired soda type by pressing the corresponding button on the face of the handheld soda gun . – Using a combination of a carbonator, pump and water tap, the gun mixes the soda at the desired flavor intensity through designated tubes in the gun .
How often do beer lines need to be cleaned?
every two weeks
How do you remove nozzles from a soda machine?
Remove the nozzles and diffusers for all valves by turning them counter clockwise and pulling down. Separate each nozzle from its diffuser and rinse all parts with warm water. Soak the nozzles and diffusers in sanitizing solution for 60-90 seconds.
Can you soak a soda gun?
Remove and dismantle the nozzles and soak them in hot water. You can submerge the gun for up to 30 seconds in hot water, and then simply wipe it clean with a cloth. If the nozzle is difficult to remove, soak only the nozzle part of the bargun in carbonated water for 5 minutes.
Are soda machines clean?
Mold and Bacteria Since restaurant workers rarely clean the soda machines , there’s most definitely a crap ton of mold in the pipes that your bubbly beverage runs through. And the ice in your drinks from places like McDonald’s, Burger King and Starbucks is even worse.
How do you deep clean a bar?
Back Bar Cleaning Checklist: EVERYTHING YOU NEED TO KNOW TO STAY UP-TO-CODE Wipe down the bar : Take out the trash regularly: Clean glass washing systems: Sweep behind the bar : Empty and sanitize ice bins: Place floor mats in the dish washer: Wipe down bottles in the speed wells: Clean the speed rails:
How do you turn off a soda gun?
Turn the shut -offs 90 degrees clockwise to shut off the flow of all products at the dis- penser’s manifold (Fig. 13). After all shut -offs are turned 90° to the OFF position (Fig. 13), depress all buttons on the dispensing handle to release pressure between the manifold and handle.
How do you clean a beverage dispenser?
Have a Shower! Rinse the beverage dispenser with warm water, make sure to rinse both its inside and outside. Add a drop or two of mild dish detergent to a wet microfibre cloth. Soap it up on the inside and outside. Rinse thoroughly until there’s no more sudsy residue left.
What is M on a soda gun?
Q-quinine or tonic. T- Tonic. Term. M – Sour Mix. O- O.J.
How does bag in a box soda work?
The syrup is often stored in plastic bags that are connected to the tubes. The soda flavoring is drawn from the plastic bags using air pressure when the customer pushes down the lever. In addition, the ice bin keeps the soda cold and also provides customers with ice for their drinks.